MarSurf | Combined contour and surface measuring station

MarSurf UD 130

Art. no. 6720823

The perfect first step into
high-precision measurement
with 130 mm tracing path

The MarSurf UD 130 closes the gap between the high-end solution MarSurf LD 130 / LD 260 and the new standard combination measuring station MarSurf VD 140 / 280 with two drive units.
The technical specification of the MarSurf UD 130 is based on the high-quality interferometric probe system and the fast measuring and positioning speeds that have reduced the measuring times for each workpiece.

MarSurf UD 130
• Roughness and contour in one step
• High measuring and positioning speed
  minimizes measuring times dramatically

• Innovative probe system solution
• Quick and reliable replacement of the probe arms
  with simultaneous probe arm detection by
  magnetic fixture
MarSurf UD 130 | Art.-Nr. 6720823
Positioning speed 0.1 mm/s to 30 mm/s
End of traversing length (in X) 130 mm
Measuring speed 0.1 mm/s to 5 mm/s
Guide deviation 0.12 μm / 60 mm
0.40 μm / 130 mm
Probe arm length 100 mm; 150 mm; 200 mm
Resolution 2 nm
Probe Combined roughness and contour probe system
Measuring range mm

10 mm (100 mm probe arm)
20 mm (200 mm probe arm)

Traversing lengths 0.1 mm to 130 mm
Measuring force (N) 1 mN to 30 mN, software-adjustable
Dimensions
Wide range of workpieces
Measurement of very small  through to very large workpieces possible
Combined measurement methods
Large measuring area and very high resolution enables roughness and contour measurement in one step
Short measuring times
High measuring and positioning speed minimizes measuring times dramatically
MarSurf | Combined contour and surface measuring station

MarSurf UD 130

Art. no. 6720823

The perfect first step into
high-precision measurement
with 130 mm tracing path

The MarSurf UD 130 closes the gap between the high-end solution MarSurf LD 130 / LD 260 and the new standard combination measuring station MarSurf VD 140 / 280 with two drive units.
The technical specification of the MarSurf UD 130 is based on the high-quality interferometric probe system and the fast measuring and positioning speeds that have reduced the measuring times for each workpiece.

MarSurf UD 130
• Roughness and contour in one step
• High measuring and positioning speed
  minimizes measuring times dramatically

• Innovative probe system solution
• Quick and reliable replacement of the probe arms
  with simultaneous probe arm detection by
  magnetic fixture
MarSurf UD 130 | Art.-Nr. 6720823
Positioning speed 0.1 mm/s to 30 mm/s
End of traversing length (in X) 130 mm
Measuring speed 0.1 mm/s to 5 mm/s
Guide deviation 0.12 μm / 60 mm
0.40 μm / 130 mm
Probe arm length 100 mm; 150 mm; 200 mm
Resolution 2 nm
Probe Combined roughness and contour probe system
Measuring range mm

10 mm (100 mm probe arm)
20 mm (200 mm probe arm)

Traversing lengths 0.1 mm to 130 mm
Measuring force (N) 1 mN to 30 mN, software-adjustable
Dimensions
Wide range of workpieces
Measurement of very small  through to very large workpieces possible
Combined measurement methods
Large measuring area and very high resolution enables roughness and contour measurement in one step
Short measuring times
High measuring and positioning speed minimizes measuring times dramatically
To top