MarForm | Precision 3D measuring station

MarForm MFU 200 Aspheric 3D

Art. no. 5440560

The MarForm MFU 200 Aspheric 3D is used to test optical components quickly in 2D and 3D close to the production area. MarForm measuring machines have been recognized for decades for their accuracy and stability.

MarForm MFU 200 Aspheric 3D
MarForm MFU 200 Aspheric 3D
The MarForm MFU 200 Aspheric 3D is a precision measuring instrument which with its very low measurement uncertainty is ideally suited to your process optimization requirements.
Using the measuring station in a vibration-cushioned cabinet keeps external interference such as vibration and dirt away from the measuring objects.
Optical and tactile sensors can be positioned in any angular position (0° to 360°) using the motorized swivel joint and thus offer a high degree of flexibility. The RMS value, PV value and lead error are shown as parameters.
In the software the individual parameters for the aspheres, such as the radius of curvature R0, conical constant k and the aspheric coefficients Ai, can be adjusted to the measuring results when adjusting the nominal asphere to the fit asphere.
Practical applications include the optical measurement of the form deviation of the optics, the tactile measurement of the circumference cylinder on the optics, the calculation of the axis offset to the zenith of the lens (offset of optical axis to mechanical axis), and the tactile measurement of the tilt on the bottom of the optic. In addition, the highly accurate 3D measuring station MarForm MFU 200 Aspheric 3D provides the kinematic options to measure optical freeforms, off-axis aspheres, and toroids.
MarForm MFU 200 Aspheric 3D | Art. no. 5440560
Pos.-/Meas. path X-axis 190 mm
Positioning speed X axis 0.1 - 50 mm/s
Pos.-/Meas. path Z-axis 320 mm
Positioniergeschwindigkeit Z-Achse 0.1 - 50 mm/s
Geradheitsabweichung X-Achse 0,15
Straightness deviation Z-axis 0,1
Axial running deviation C-axis 0.02 + 0.0002
Centering and tilting table automatic
Table diameter 180 mm
Table load max. 200 kg
Label Art. no.
Rel_MarOpto MarWin
MarWin MarOpto
Optimized for the digital factory
The data for the differential profile is made available to the machine tool for readjustment (closed loop).
Combined measurement methods
Complete an optical and tactile measurement of your lenses and make use of all of the advantages of the highly accurate form tester.
Output of the characteristic values as per DIN ISO 10110-5, for example PV, RMS, and lead error
To top