MarStand | Radial run-out gage with center supports

MarStand 818

Art. no. 4622202

Radial run-out gage with center supports MarStand 818
Distance between centers: 0 - 450 mm
Height of centers: 100 mm
Package contains: measuring bench, measuring arm 818 XNB, center supports, excludes indicator

MarStand 818

Consisting of:

Measuring bench:

  • Flatness of support surface as per DIN 876-2
  • With two T-grooves to hold center supports and post and support assembly

Post and support assembly 818 XNB:

  • Support arm fitted with joint
  • Holder with display device with 8 mm shaft diameter and fine adjustment

Center supports:

  • Both center supports are adjustable
  • Right center support includes retractable clamping tip
  • Left center support has fixed counter-tip
  • Center supports with peak height of 75 mm and 90° V-blocks for workpieces without center bore (for outer diameter up to 20 mm)
Height of centers 100 mm
Permitted height difference 0.05 mm
Permitted lateral difference 0.05 mm
Distance between centers 0 - 450
Max. workpiece load per tailstock 20 kg
Product weight 35 kg
Structural dimensions (L x W) mm 700 x 180
Mounting hole 8H7
T-groove width 12H7
Dimensions d 22 mm |
Dimensional drawing 1

Variety of applications for our products

  • Fast and easy radial run-out testing between tips
  • When measuring a shaft between tips, the reference axis for the radial runout measurement is usually identical to the rotational axis during production. A minimal radial run-out deviation can therefore be expected during this test procedure.
Label Art. no. Suitable for height of centers mm Height of centers T-groove width Height of V-supports
4622211 V-support anvils in pairs
818 pe
4622211 100 mm 100 mm
4622277 Support arm
818 XNB
4622277 150 12 mm
4622221 Roller supports in pairs
818 ab
4622221 12 mm 100 mm
4622216 V-support in pairs
818 pb
4622216 120 12 mm
To top