MarForm | Form metrology

MarForm MMQ 500

Art. no. 5440901

Highly efficient and fully automatic solution for form and position measurement and beyond

The high-precision and very fast MarForm MMQ 500 was designed for a wide range of workpieces and measuring tasks and is very easy to operate thanks to the intuitive software. That's why it is the best choice among table-top form measuring devices.

MarForm MMQ 500
MarForm MMQ 500
The MarForm MMQ 500 is the best choice among tabeltop form measuring devices due to its wide range of high-precision measurement capabilities. Thanks to the fully automatic centering and tilting table as well as the generally optimized design, it can be used very flexibly and enables maximum utilization. They are characterized by the following features:
  • Suitable for small workpieces from a few millimeters in size to large and/or heavy workpieces weighing up to 80 kg
  • Highest axis accuracy, even with smaller tolerances Best
  • repeatability, even for difficult measuring tasks
  • Measurement of form, position, roughness, contour and lead in one measurement sequence
  • Intuitive and proven MarWin
  • measurement and evaluation softwareT7W inductive probe system with motorized swivelling probe arm included in the measuring station scope
Fast alignment:
The fully automatic centering and tilting table enables faster mechanical workpiece alignment than comparable models, thus increasing efficiency and productivity.
Universality and high load capacity:
Measure a variety of different workpieces weighing up to 80 kg; for example with our innovative quick-clamping device for bearing rings of various sizes.
MarForm MMQ 500 | Art. no. 5440901
Pos.-/Meas. path X-axis 280 mm
Pos.-/Meas. path Z-axis 470 mm
Positioning speed C-axis 0.2 - 20 1/min
Positioning speed X axis 0.5 - 30 mm/s
Positioning speed Z-axis 0.5 - 100 mm/s
Workpiece diameter max. 530 mm
Axial running deviation C-axis 0,02 + 0,0001
Straightness deviation X-axis 0.3 µm/100 mm
Straightness deviation Z-axis 0.15 µm/100 mm
Reference temperature 20 °C
Centering and tilting table automatic
Table diameter 300 mm
Table load max. 80 kg
Probe system Tactile 1D
Special equipment CNC table
Permissible humidity max. 85 % relative humidity; non-condensing
Scope of delivery T7W probe system (incl. probe arm ⌀ 3 x 60 mm)

Variety of applications for our products

  • Mechanical engineering:
    Bearings, ball screws, shafts, sockets, rotational bushings
  • Measurement close to production:
    PLC and end-of-line testing
  • Automotive:
    Steering, brake system, gearbox, motor
  • Medicine:
    Hip and knee endoprostheses, medical screws, teeth implants
Label Art. no.
Rel_MarForm MarWin
MarWin MarForm
Rel_MarForm
Short total testing time
Fast alignment of komplex workpieces
Precise measurements
The increased accuracy of the machine ensures a lower level of measurement uncertainty. This ensures that the production machines have a wider scope and that production can be more cost-effective.
Wide range of workpieces
From small to large and heavy – from form to roughness through to contour and line form: The MMQ 500 can be used for a wide range of workpieces.
To top