Millimar | Analogowe przyrządy wskazujące do pneumatycznych przetworników pomiarowych (system jednowzorcowy)

Millimar D-10000M

Nr art. 2095193

Analogowe przyrządy wskazujące do pneumatycznych przetworników pomiarowych (system jednowzorcowy) Millimar D-10000M
Zakres wskazań podziałki µm: ± 7,6 µm
Działka elementarna podziałki µm: 0,2 µm
Zgodność: Federal
Tłumaczenie: 10000:1
Wejścia pneum. Sprzęt pomiarowy: 1
Zakres dostawy: Adapter do trzpieni pneumatycznych ze zgodnością Mahr Federal, Filtr powietrza, Wąż zasilający AHO-2

Millimar D-10000M
  • Operated with regular workshop compressed air (3–10 bar).
  •  An internal pressure regulator keeps the measuring pressure within the calibrated range.
  • Zero offset of the instrument with just one setting standard and the zero adjuster.
  • Clear display with fine scale graduation and needle-thin pointer gives an accurate, reliable readout. An integrated air filter removes dust and dirt particles from the air supply.
  • Equipment connection on the front of the device. Hand tightening is sufficient for tight connections.
  • No recalibration required after changing the measuring equipment. Measurement can be resumed immediately after setting the instrument to zero.
  • 4 models available, choice of mm or inches
Millimar D-10000M | Nr art. 2095193
Wyświetlacz Duża podziałka analogowa z 2 znakami tolerancji
Typ produktu D-10000M
Skala Standard – średnica 82,6 mm/3,25"
Zakres wskazań podziałki µm ± 7,6
Działka elementarna podziałki µm 0,2
Zgodność Federal
Cechy
Etykieta Nr art.
2086962 Wzorzec nastawczy
AMR-14
2086962
2201991 Particle filter, filter size 5µm
AFL-10
2201991
2201992 Wymienny element filtrujący dla filtra AFL-10
AFL-21
2201992
2201993 Wymienny element filtrujący dla filtra AFL-24
AFL-23
2201993
Karta katalogowa
Pobierz
Na górę