Millimar | 3-dyszowy pierścień pomiarowy

Millimar 6303

Nr art. 2105750

3-dyszowy pierścień pomiarowy Millimar 6303
Zgodność: Mahr
Wersja materiału: stal utwardzana
Tłumaczenie: 2500:1, 5000:1, 10000:1
Wymiar nominalny mm: 8.000 - 14.000 mm

Millimar 6303
  • Mahr / Mahr Federal nozzle ring gages have a large clearance tolerance, making them easier to insert into the bore to be measured and allowing a greater measuring range
  • Long service life: Thanks to a larger plug gage spacing and (optional) hard chrome-plated finish to the body, the nozzle plug gage has an extended service life
  • The recessed measuring nozzles are located deep in the body of the plug gage, protecting them from damage
  • Large nozzle dimensions prevent clogging with dirt and oil
  • Order information: Please always state when ordering: Transmission ratio of the display unit (e.g. 2500:1), the nominal size to be measured and the specified workpiece tolerance
Millimar 6303 | Nr art. 2105750
Typ produktu 6303
Wymiar nominalny mm 8.000 - 14.000
Wymiar nominalny od 8 mm
Wymiar znamionowy do 14 mm
Tłumaczenie 2500:1 , 5000:1 , 10000:1
Zakres pomiarowy (tekst) 100 µm / 50 µm / 25 µm
Zgodność Mahr
Rysunek zwymiarowany 1
Etykieta Nr art.
2237666 Standardowy uchwyt plastikowy
2237666
Karta katalogowa
Pobierz
Produkty | Warianty i opcje
Na górę