Высококачественные измерительные решения для контроля качества на участках ОТК, на производстве, при входном контроле деталей и при опытно-конструкторских работах.
Gear Metering Pumps & Meter Mix Dispense Machines with highest accuracy for processing liquids and pastes.
High-precision rotary stroke bearings for backlash-free linear and rotational movements for use in machine and device construction.
Инновационный ручной измерительный инструмент Mahr: Штангенинструмент, микрометрический инструмент и индикаторы часового типа #96 как с цифровым отсчетным устройством, так и со шкальной индикацией, со встроенным беспроводным интерфейсом Integrated Wireless. Приборы для относительных измерений и образцовые меры Mahr являются незаменимыми инструментами для производственной метрологии.
From analog to digital, the entire spectrum of calipers. Easy handling, wireless, and highly accurate. Perfect for efficient use in manufacturing.
Штангенциркули с цифровым отсчетным устройством отличает надежность и простота считывания цифровой индикации, современный дизайн и точность, присущая приборам Mahr. Ассортимент включает измерительные приборы для всех областей применения. Различные интерфейсы передачи данных и степень защиты до IP67 обеспечивают выполнение любых требований.
Отсутствие бликов, затрудняющих считывание показаний, закаленная сталь, приподнятые направляющие для защиты шкалы от износа и высочайшая точность. Возможности качественного штангенциркуля Mahr и классического нониусного штангенциркуля.
Large, high-contrast dial and shock-protected measuring tool for lasting precision. A tried and tested mechanical design for fast and safe reading.
Maximum precision in a variety of designs. Micrometers from Mahr are available in conventional mechanical and digital and wireless versions.
A clear digital display, modern design and the usual Mahr accuracy characterize our digital outside micrometers. The range includes measuring instruments for all applications. Various interfaces for data transmission and a high protection rating up to IP 65 leave no demands unfulfilled.
Максимальная точность благодаря отсутствию бликов, затрудняющих считывание показаний, теплоизоляционным накладкам и точно доведенному микрометрическому винту. Возможности качественного микрометра Mahr.
Особенно хорошо подходит для надежного и быстрого контроля серийных деталей (валов, болтов/шпилек, хвостовиков). Быстрое и точное считывание линейных размеров с помощью измерительной головки.
Suitable for measuring large diameters and testing distances up to 2,500 mm
Available with scale or digital display or as a quick-measuring instrument with pistol-type grip. The Mahr 3-point inner measuring devices always provide reliable measuring results due to automatic self-centering.
Anti-glare reading and a precision-ground spindle for maximum accuracy. Features of a quality micrometer from Mahr.
From analog to digital, the entire spectrum of dial gages, dial comparators and dial test indicators. Easy handling, wireless (optionally), and highly accurate. Perfect for efficient use in manufacturing.
A clear digital display, robust construction and high Mahr accuracy characterize our digital dial gages. The range includes measuring instruments for all applications. Various interfaces for data transfer and a high protection rating up to IP 54 leave no demands unfulfilled.
Высокая чувствительность и точность благодаря надежному креплению измерительных осей, прецизионному передаточному механизму и измерительному стержню, устанавливаемому с высокой точностью
Высокая чувствительность и точность благодаря надежному креплению измерительных осей, прецизионному передаточному механизму и измерительному стержню, устанавливаемому с высокой точностью
Compared to analog dial indicators, Millimess dial comparators have even more precise components, providing better measuring accuracy and a much improved hysteresis error. These advantages are particularly evident in runout tests, straightness and flatness measurements and comparative measurements.
The high-precision inductive Millimess dial comparators are capable of digital increments of up to 0.2 μm. User-friendly operating functions such as tolerance monitoring, minimum or maximum recording for dynamic measurements, a combined numerical and scale display and simple data transfer make it an indispensable precision measuring instrument.
Чувствительное, оптимизированное с помощью ЭВМ средство измерения обеспечивает максимальную надежность и точность. Приборы, предназначенные для использования в жестких производственных условиях, оснащены циферблатом с закаленным минеральным стеклом, превосходно защищенным от царапин и повреждения, и уплотнением, обеспечивающим надежную защиту от проникновения жидкостей.
An easy-to-read digital display, the robust design and high Mahr accuracy characterize our digital dial test indicators.
Mahr 3D measuring probes for NC machines, machining centers and eroding machines shorten setup and downtimes. Perfect for accurately contacting reference edges on workpieces and fixtures.
Whether Integrated Wireless, external wireless modules, USB, Opto RS232, or Digimatic: Regardless of which interface standard you use, MarConnect will always provide the best connection.
Many Mahr precision gages have a data output with MarConnect interface. Regardless of which interface standard you use, (USB, Opto RS232 or Digimatic), MarConnect will always provide the best connection.
Семейство беспроводных приборов Mahr Wireless гарантирует точность результатов измерения и неограниченную мобильность. Современный и простой способ измерения без ограничений проводных технологий.
MarStand measuring tripods, measuring tables and radial run-out gages offer high stability, the basis for precise measuring results. They offer the necessary support for your dial indicators, dial comparators, dial test indicator measuring devices and measuring probes.
Measuring tripods provide the basis for precise measuring results due to their stable design. They offer the necessary support for your dial indicators, dial comparators, dial test indicator measuring devices and measuring probes.
Стойки и кронштейны MarStand используются для создания индивидуальных решений, обеспечивающих высокую устойчивость конструкции, что является необходимым условием для получения точных результатов измерения. Они предоставляют необходимые средства для проверки индикаторов часового типа, измерительных головок, рычажно-зубчатых индикаторов и измерительных щупов.
Measuring tables combine a precise and level measuring table, a stable measuring column and strong arm parts. MarStand measuring tables provide the basis for precise measuring results due to their extra stable design.
Radial run-out gages are the simplest method of detecting positional and form errors on shafts in a close-to-production environment. Due to the variety of models, the robust MarStand radial run-out gages form the basis for a wide range of workpiece requirements and precise measuring results.
Test plates made of hard granite are the perfect surface for your height measurement instruments due to the plates’ high strength and dimensional stability.
Using indicating gages as comparative gages make the perfect tool for precision measurements in manufacturing. Setting the gage to a reference standard reduces the deviation margin and minimizes the influence of temperature fluctuations on the measurement result.
Прецизионные индикаторные скобы — это идеальные приборы для точного измерения цилиндрических деталей, таких как валы, болты/шпильки и стержни. Особенно хорошо они подходят для быстрой и безопасной проверки серийных деталей. Быстрое и точное считывание линейных размеров с помощью измерительной головки.
Inner measuring devices are the perfect tools for precisely measuring the diameter, roundness and conicity of holes.
Наши толщиномеры представляют собой надежные и простые приборы для быстрого измерения параметров различных пленок, листов и пластин.
Когда обычные измерительные приборы, такие как штангенциркули или микрометрические нутромеры, невозможно использовать из-за геометрических особенностей детали, идеальным решением станут индикаторные приборы реечного типа!
Our depth gages offer a robust and simple range for particularly fast depth measurements. The 8mm mounting shaft allows the use of dial indicators, dial comparators and probes according to the measuring task.
Universal measuring instruments are the perfect partners for precision measurements in production, because the comparison measurement to a reference standard minimizes the influence of temperature fluctuations on the measurement result.
No matter whether gear, thread, taper or recess: Multimar universal measuring instruments are an ideal solution for almost all internal and external measurements for which standard measuring instruments are not suitable. A choice of basic units and an extensive range of accessories are available.
Точная регулировка приборов для измерения внутренних и наружных размеров. Приборы для настройки 844 S оснащены всем необходимым для выполнения любой измерительной задачи, в том числе и для приборов большой длины.
No matter whether centering shoulders, narrow collars or recesses: The Multimar 36B universal measuring instruments are an ideal solution for almost all inner and outer measurements. A choice of basic units and an extensive range of accessories are available.
Вы должны быть уверены в установочных мерах и приборах Mahr, ведь они служат основой для получения точных результатов измерений.
Trust in Mahr’s setting standards - because they are the basis for precise measuring results.
Mahr gage blocks ensure that you have high-quality reference and working standards at your disposal. Choose from four tolerance classes and two materials to suit the requirements of your workshop, production or quality assurance.
Mahr pin gages are available in three tolerance classes and various designs. Choose the device to suit the requirements of your workshop, production or quality assurance.
The requirements for electrical length measuring instruments are just as varied as their applications. Excellent reliability, precision and simple operation are called for.
The requirements for electrical length measuring instruments are just as varied as their applications. Excellent reliability, precision and simple operation are called for. Millimar compact and column measuring instruments meet these requirements.
Millimar length measuring instruments are compact, robust, and easy to use. They are versatile evaluation and indicating instruments for measuring tasks of manageable complexity in the production area and in the measuring room.
Разнообразные сочетания модулей и программного обеспечения позволяют создать рабочую среду и инструменты с высочайшей степенью адаптации к вашим требованиям.
Smart and universally applicable software for complex measurement tasks in the manufacturing sector
Millimar transducers are the most important components of a measuring chain. Their characteristics determine the quality of the entire measurement. Depending on the application, various technologies are available for this purpose. For example, Millimar inductive measuring probes: These products are rugged, versatile and attractively priced.
No matter whether thickness measurement, radial runout or concentricity: With the inductive probes you can record measured values and deviations independent of shape, support or radial runout deviations. Their great advantage is the large linearity range and the relative insensitivity to interference. The probes are mainly used for comparative measurements in production, but the specific tasks of the sensor can vary.
Pneumatic length measuring instruments are characterized by their high accuracy and long-term stability. Non-contact measurement with measuring nozzles does not damage the workpieces. Even workpieces that are uncleaned, oiled, lubricated or coated in lapp
Millimar length measuring instruments are compact, robust, and easy to use. They are versatile display and evaluation devices for measuring tasks of manageable complexity in the production area.
Measurement results are displayed on 101 three-color LEDs and can easily be read from a distance. If the programmable warning and tolerance limits are exceeded, the segments change colors from green to yellow or red.
The Millimar pneumatic measuring devices quickly and accurately record dimensional deviations. It has proven itself for many years in the industrial production and measuring room.
For measurement and evaluation on the go.
Non-contact measuring, using pneumatic measuring rings, no damage to the workpieces.
Adapt the measuring station to your measuring task with the accessories for air measuring technology.
Trust in Mahr’s setting standards - because they are the basis for precise measuring results
Setting of pneumatic measuring instruments (nozzle ring gages) Meticulously hardened, aged, ground and lapped.
Setting of pneumatic measuring instruments (nozzle plug gages) Meticulously hardened, aged, ground and lapped.
Want to aim high with your measurements? Digimar is the one for you!
For scribing and marking workpieces in the workshop. Easy measurement of heights and distances.
Touch operation, ergonomic handling and a wide range of evaluation options: This is what the Digimar 816 CLT height measuring device stands for.
Touch operation, ergonomic handling and a wide range of evaluation options: This is what the Digimar 817 CLT height measuring device stands for.
Precision length metrology stands for high-precision dimensional metrology – for both absolute and relative measurements.
Простые в использовании универсальные приборы для измерения длины и настройки средств измерения в производственных условиях
Простые в использовании универсальные приборы для измерения длины и настройки средств измерения в производственных условиях
Due to the wide product range from the simple gage block test stand, fully automatic dial gauge test stand, and the ULM devices to the ultra-precise and partially automated CiM universal measuring machine, Mahr always offers a practical solution for production, measuring rooms and calibration laboratories. In other words: Maximum precision combined with extremely efficient measuring processes.
Классические приборы ULM или приборы PLM и CiM с электроприводом. Универсальные приборы Mahr для измерения длины — это удобство, скорость и надежность измерений с минимальной неопределенностью.
Полуавтоматическая и полностью автоматическая проверка индикаторов часового типа, рычажно-зубчатых индикаторов, измерительных головок и щупов, обеспечивающая эффективность и точность.
Полуавтоматическая и полностью автоматическая проверка индикаторов часового типа, рычажно-зубчатых индикаторов, измерительных головок и щупов, обеспечивающая эффективность и точность.
Manual testing of dial gages, dial test indicators and comparators - easy and precise
Trust in Mahr gage block comparators - because they are the basis for the precise testing of your standards
Microscopes are used in almost all industries for the quick inspection of distances, radii, and angles. In the laboratory or close to production.
Измерительные микроскопы
Surface metrology for industry and research
Structured functional surfaces with strict tolerances require high-precision measuring systems that record the topography of a workpiece or object over a short area in a minimum of time.
Contour measurement technology is used to determine rough shape deviations.
Precisely measure contours with optical measuring instruments
Contour and roughness measurement combined: The professional allrounder
Contour and roughness measurement combined: The professional allrounder
2D/3D Contour measurement as well as roughness measurement acc. to ISO 25178 / ISO 4287
3D surface metrology for industry and research
Measure everywhere with mobile measuring devices!
Measuring stations for the measurement of high-precision lenses
When standard solutions are no longer enough: Individual customized solutions
Structured functional surfaces with strict tolerances require high-precision measuring systems that record the topography of a workpiece or object over a short area in a minimum of time.
Versatile and powerful in measuring rooms and laboratories
Contour and roughness measurement combined: The professional allrounder
Tactile measuring stations for contour & roughness measurements
2D/3D contour and roughness measurement acc. to ISO 25178 / ISO 4287
3D surface metrology for industry and research
Measure everywhere with mobile measuring devices!
Mobile 3D surface metrology for
use on-site
Mobile measuring instruments let you measure exactly where you need the results.
Measuring stations for the measurement of ultra-high sensitivity lenses
When standard solutions are no longer enough: Individual customized solutions
Metrology
Experience outstanding features combined with extreme flexibility in workpiece size and increase your productivity in the production environment.
Flexible measurement of workpieces that can be clamped between centers
High resolution and very fast matrix camera for measuring a large number of features on rotationally symmetrical workpieces.
Fast optical matrix camera in combination with high-precision touch probes for measuring a large number of features on rotationally symmetrical workpieces.
Flexible clamping options and high-precision alignment using a fully automatic centering and tilting table
High resolution and very fast optical matrix camera for measuring a wide range of rotationally symmetrical workpieces. Addition of a fully automatic centering and tilting table for extremely fast, mechanical alignment and flexible clamping options.
Fast optical matrix camera in combination with high-precision touch probes for measuring a large number of features on rotationally symmetrical workpieces. Addition of a fully automatic centering and tilting table for extremely fast, mechanical alignment, flexible clamping options and, for example, internal measurements.
Systems for measuring form and position tolerances, such as roundness, flatness, straightness and coaxiality. From manual to fully automated.
The device measure features such as roundness, straightness and concentricity simply, cost-effectively, and yet with high precision. Our manual form measuring instruments are suitable for both the measuring room and for measurements close to production.
With our automatic form measuring systems, you reduce your process costs, but without driving up inspection costs - through stable, innovative devices with the highest level of automation, flexibility and accuracy.
Metrology
Experience outstanding features combined with extreme flexibility in workpiece size and increase your productivity in the production environment.
Flexible measurement of workpieces that can be clamped between centers
Flexible clamping options and high-precision alignment using a fully automatic centering and tilting table
Optical and tactile shaft measurement systems for use in harsh manufacturing environments. Complete measurement of all common rotationally symmetrical workpieces.
.
Universal, fully automatic and robust optical shaft measuring devices for use in harsh production environments.
Optical-tactile shaft measurement devices for use in harsh manufacturing environments. Complete measurements of all common rotationally symmetrical workpieces.
Metrology
Experience outstanding features combined with extreme flexibility in workpiece size and increase your productivity in the production environment.
Flexible measurement of workpieces that can be clamped between centers
Flexible clamping options and high-precision alignment using a fully automatic centering and tilting table
From highly specialized gear analyses to fully integrated series measurement - Mahr is your reliable partner at every level of modern gear and gearbox manufacturing.
Measure your product at the point of origin - including rapid feedback to the manufacturing process in order to avoid waste.
Wide range of technologies and products for fast and non-contact recording of surfaces and geometries.
Измерительные микроскопы
Determination of roughness, contour and many other surface parameters.
Surface metrology for industry and research
Minimal roughness accurate to the nanometer
Optical analysis of surface topographies and geometries
Refurbished systems in proven Mahr quality
Touch operation, ergonomic handling and a wide range of evaluation options: This is what the Digimar 816 CLT height measuring device stands for.
MarSurf M 310 with printer
Art. no. 6910267
Мобильный прибор для измерения шероховатости MarSurf M 310 with printer
Наконечник щупа: 2 мкм
В комплекте поставки (текст):
- MarSurf M 310 basic device
- Drive unit (detachable)
- 1 standard probe PHT6-350, conforming to standards
- Built-in rechargeable battery
- Roughness standard integrated into housing (detachable), including Mahr calibration certificate
- Set consisting of Star Micronics SM-L200 Bluetooth® printer and USB wireless adapter
- Probe protection / V-block holder
- Charger / 3 adapters
- Height adjustment (integrated)
- Carry case with shoulder strap
- USB cable
- Hand-held support with height adjustment (pair)
- Extension cable for drive unit (length 1.2 m)
- Operating instructions
For those who need more. The MarSurf M 310 has the same functions as the PS 10, but offers you crucial, additional functions.
- Simple and intuitive to use: as easy as using a smartphone
- Large, illuminated 4.3" TFT touch display
- Specification of the cutting line C in μm or in % of Rz for the characteristic values Rmr and tp
- Removable drive unit
- 31 thread parameters
- Work without errors, thanks to integrated, removable roughness standard
- Automatic cutoff selection, so even non-specialists can be sure of getting the correct measuring results
- Micro USB interface for remote control via ASCII commands, e.g. via software for statistical process control
- USB-A interface - for connection e.g. of a USB wireless adapter or USB/wireless printer
- Transfer of measurement protocols and data optionally wireless or cable
- IATF 16949 compliant - Secure traceability with MarConnect
- Print directly to the mobile printer (as an option or directly in the set with printer)
- Data backup as TXT, X3P, CSV and PDF file
- Creation of finished PDF protocols directly in the measuring device
- Custom comments for the PDF protocol are entered directly on the MarSurf M 310
- Display and print MRK and ADK curve
- Save over 1000 measuring programs (Quick & Easy)
| MarSurf M 310 with printer | № детали 6910267 | |
|---|---|
| Длина трассирования (Lt) | till 15 mm |
| Размер в мм | 160 mm x 77 mm x 50 mm |
| Принцип измерения | Метод ощупывания |
| Unit of measurement | metrisch/inch |
| Измерительное усилие (Н) | 0,00075 |
| Probe tip radius | 2 µm |
| Фильтр в соответствии с ISO/JIS | Гауссовский фильтр согласно ISO 16610– 21 (ранее ISO 11562), специальный фильтр согласно DIN EN ISO 13565– 1, фильтр лямбда-s согласно DIN EN ISO 3274 (отключаемый) |
| Отсечка шага Ic в соответствии с ISO/JIS | 0,25 мм , 0,8 мм , 2,5 мм , автоматическое определение фильтра , переменное |
| Укороченный ход в соответствии с ISO/JIS | С возможностью выбора |
| Число n базовых длин в соответствии с ISO/JIS | С возможностью выбора: 1–16 |
| Скорость измерения | 0.5 mm/s to 1 mm/s |
| Positioning speed X-axis min. | 0.5 mm/s |
| positioning speed X-axis max. | 1 mm/s |
| Скорость позиционирования (мм/с), ось X | 0.5 - 1 mm/s |
| Параметры поверхности |
Über 30 Kennwerte für R-Profil gemäß aktueller Normung ISO/JIS/ASME/Motif |
| Электропитание | Integrated rechargeable battery (min. 1200 measurements) or via charging unit |
| Интерфейс передачи данных | USB A , USB , Дуплексный , Гнездо microSD для карт памяти SD/SDHC емкостью до 32 ГБ |
| Языки | Немецкий , Английский , Французский , Итальянский , Испанский , Португальский , Голландский , Шведский , Русский , Польский , Чешский , Японский , Китайский , Корейский , Венгерский , Турецкий , Румынский |
| Емкость хранилища | Минимум 3900 профилей, минимум 500 000 результатов, минимум 1500 протоколов измерения в формате PDF, возможность установки карты microSD емкостью до 32 ГБ |
| Щуп | Индуктивный опорный датчик |
| Функция калибровки | Динамическая, Ra, Rz, Rsm |
| Категория защиты IP | IP 40 |
| Вес | 2.96 KG |
| Прочее | Блокировка, защита паролем, настройка даты и времени |
| Длина трассирования в соответствии с ISO 12085 (MOTIF) | 1 мм, 2 мм, 4 мм, 8 мм, 12 мм, 16 мм |
| Длина оценки ln в соответствии с ISO/JIS | 1,25 мм, 4,0 мм, 12,5 мм |
| Наконечник щупа | 2 мкм |
| Параметры | A1 , A2 , Ar , CF , CL , CR , Mr1 , Mr2 , R , R3z , RPc , RS , RSk , RSm , Ra , Rk , Rmax , Rmr (tp [JIS, ASME] — аналог Rmr) , Rp , RpA (ASME) , Rpk , Rpm , Rpm (ASME) , Rq , Rt , Rvk , Rx , Rz , Rz (JIS) , Rz (Ry [JIS] — аналог Rz) , Vo |
| Класс защиты | IP 40 |
| Аккумуляторные батареи | Литий-ионная аккумуляторная батарея, минимум 1200 операций измерения |
| Электропитание (широкий диапазон) | от 100 до 264 В |
| Диапазон измерения в мм | 0,350 |
| Разрешение профиля | 8 нм |
| Длина трассирования Lt в соответствии с ISO/JIS | 1,5 мм , 4,8 мм , 15 мм , N x Lc , переменное , автоматический |
Variety of applications for our products
- For shafts and housing components
- For large machines
- For large workpieces
- For milled and turned parts
- For ground and honed workpieces
- On the production line or directly on the machine, ideal for rapid testing of the surface roughness of a workpiece in or on the machine.
| Label | Art. no. | Вес | Диапазон измерения в мм | Диапазон измерения в дюймах | Дискретность отсчета | Дискретность отсчета | Предел допускаемой погрешности в мкм | Предел допускаемой погрешности | Предел допускаемой погрешности в дюймах | Предел допускаемой погрешности в дюймах | Интерфейс передачи данных | Вес изделия | Диапазон точной регулировки в мм | Крепежное отверстие | Высота колонки | Диаметр d колонки | Вылет измерительной головки (макс.) | Размеры основания | Поверочная призма для диаметров вала | Усилие отрыва призмы | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Двунаправленный кабель передачи данных USB DK-U1 |
4102603 | |||||||||||||||||||
|
Удлинитель для щупов PHT 80 мм PHT (80 mm) |
6850540 | 0.1 KG | ||||||||||||||||||
|
Стандартный щуп, 2 мкм PHT 6-350 |
6111520 | 0.0297 KG | ||||||||||||||||||
|
|
Стандартный щуп, 5 мкм PHT 6-350/ 5µm |
6111526 | 0.03 KG | ||||||||||||||||||
|
|
Стандартный щуп (10 мкм) PHT 6-350/ 10µm |
6111527 | 0.01 KG | ||||||||||||||||||
|
Щуп для измерения отверстий диам. более 3 мм PHT 3-350 |
6111521 | 0.02 KG | ||||||||||||||||||
|
Щуп для измерения канавок PHT 11-100 |
6111524 | 0.03 KG | ||||||||||||||||||
|
Щуп для измерений на вогнутых и выпуклых поверхностях PHTR-100 |
6111525 | 0.03 KG | ||||||||||||||||||
|
Щуп для измерения боковой поверхности зуба шестерни, PHTF 0.5-100 |
6111522 | 0.03 KG | ||||||||||||||||||
|
Щуп для металлических листов PT 150 |
6111523 | 0.1 KG | ||||||||||||||||||
|
Измерительная стойка (300 мм) с чугунным основанием ST-D |
6710803 | 7.95 KG | ||||||||||||||||||
|
Измерительная стойка (300 мм) с гранитной плитой ST-F |
6710806 | 28 KG | ||||||||||||||||||
|
Измерительная стойка (300 мм) с гранитной плитой и Т-образным пазом ST-G |
6710807 | 45 KG | ||||||||||||||||||
|
Регулируемая монтажная скоба для соединения с 814 SR 814 Sh |
2247086 | 0.152 KG | ||||||||||||||||||
|
Штангенрейсмас 814 SR |
4426100 | 0 - 350 mm | 0–14" | 0.01 mm | 0.0005 inch | 40 µm | 40 | 0,0016" | 0.0016 inch | Opto RS-232C , Digimatic , USB | 7 kg | |||||||||
|
|
Штангенрейсмас 814 SR |
4426101 | 0 - 600 mm | 0–24" | 0.01 mm | 0.0005 inch | 50 µm | 50 | 0,0020" | 0.002 inch | Opto RS-232C , Digimatic , USB | 8 kg | |||||||||
|
Установочная призма PP |
6710401 | 2.01 KG | ||||||||||||||||||
|
Параллельные тиски PPS |
6710604 | 2.98 KG | ||||||||||||||||||
|
Координатный стол CT 120 |
6710529 | 2.76 KG | ||||||||||||||||||
|
Миниатюрные прецизионные тиски в комплекте 109 PS |
4246819 | |||||||||||||||||||
|
Мера шероховатости с сертификатом калибровки Mahr, глубина профиля 10 мкм PRN 10 |
6820420 | 0.2 KG | ||||||||||||||||||
|
Штатив для измерительных головок 815 GN |
4413000 | 4.2 kg | 2 mm | 8H7 | 300 mm | 14 mm | 185 mm | 150 x 150 mm | ||||||||||||
|
|
Штатив для измерительных головок 815 GN |
4413001 | 9 kg | 2 mm | 8H7 | 500 mm | 18 mm | 200 mm | 190 x 180 mm | ||||||||||||
|
|
Штатив для измерительных головок 815 GN |
4413005 | 10 kg | 2 mm | 8H7 | 750 mm | 25 mm | 230 mm | 190 x 180 mm | ||||||||||||
|
Измерительный штатив с магнитным основанием 815 MA |
4416000 | 2.5 kg | 2 mm | 8H7 | 285 mm | 230 mm | 20 - 100 | 450 N | ||||||||||||
|
|
|
