MarForm | Universal, high-precision form measuring device

MarForm MMQ 500

Art. no. 5440901

Highly efficient and fully automatic solution for form and position measurement and beyond

The high-precision and very fast MarForm MMQ 500 was designed for a wide range of workpieces and measuring tasks and is very easy to operate thanks to the intuitive software. That's why it is the best choice among table-top form measuring devices.

MarForm MMQ 500
MarForm MMQ 500
The MarForm MMQ 500 is the best choice among tabeltop form measuring devices due to its wide range of high-precision measurement capabilities. Thanks to the fully automatic centering and tilting table as well as the generally optimized design, it can be used very flexibly and enables maximum utilization. They are characterized by the following features:
  • Suitable for small workpieces from a few millimeters in size to large and/or heavy workpieces weighing up to 80 kg
  • Highest axis accuracy, even with smaller tolerances Best
  • repeatability, even for difficult measuring tasks
  • Measurement of form, position, roughness, contour and lead in one measurement sequence
  • Intuitive and proven MarWin
  • measurement and evaluation softwareT7W inductive probe system with motorized swivelling probe arm included in the measuring station scope
Fast alignment:
The fully automatic centering and tilting table enables faster mechanical workpiece alignment than comparable models, thus increasing efficiency and productivity.
Universality and high load capacity:
Measure a variety of different workpieces weighing up to 80 kg; for example with our innovative quick-clamping device for bearing rings of various sizes.
MarForm MMQ 500 | № детали 5440901
Pos.-/Meas. path X-axis 280 mm
Pos.-/Meas. path Z-axis 470 mm
Positioning speed C-axis 0.2 - 20 1/min
Скорость позиционирования (мм/с), ось X 0.5 - 30 mm/s
Positioning speed Z-axis 0.5 - 100 mm/s
Workpiece diameter max. 530 mm
Отклонение торцового биения (мкм + мкм/мм измер. радиуса) * 0,02 + 0,0001
Straightness deviation X-axis 0.3 µm/100 mm
Straightness deviation Z-axis 0.15 µm/100 mm
Рабочая температура 20 °C
Стол с регулировкой центрирования и наклона automatic
Диаметр стола (мм) 300 mm
Table load max. 80 kg
Тип щуповой системы Tactile 1D
Special equipment CNC table
Влажность (текст) max. 85 % relative humidity; non-condensing
В комплекте поставки (текст) T7W probe system (incl. probe arm ⌀ 3 x 60 mm)

Variety of applications for our products

  • Mechanical engineering:
    Bearings, ball screws, shafts, sockets, rotational bushings
  • Measurement close to production:
    PLC and end-of-line testing
  • Automotive:
    Steering, brake system, gearbox, motor
  • Medicine:
    Hip and knee endoprostheses, medical screws, teeth implants
Label Art. no.
Rel_MarForm MarWin
MarWin MarForm
Rel_MarForm
Короткое общее время испытания
Быстрое выравнивание деталей сложной формы
Точные измерения
Повышенная точность прибора обеспечивает низкий уровень неопределенности измерений. Благодаря этому промышленные приборы могут использоваться в более широком спектре областей применения при сокращении производственных затрат.
Широкий диапазон обрабатываемых деталей
Миниатюрные и крупногабаритные детали, форма и шероховатость, контур и форма линии — MMQ 500 может использоваться для измерений самых разных деталей.
To top