Precimar | Универсальная установка для поверки индикаторов

Precimar ICM 100 IP

Art. no. 5351010

Универсальная установка для поверки индикаторов ICM 100 IP

Precimar ICM 100 IP
You can use Precimar ICM 100 IP to automatically and cost-effectively test dial indicators and dial comparators. Easy handling with one hand and the clever software ensure the test device is the perfect solution for measuring rooms, calibration labs and production testing.

Testing measuring equipment has never been as efficient as with the Precimar ICM 100 IP: More than 60% time saved thanks to fast image processing, user-friendly software and simple handling.


  • Easy, institutive operation with just one hand and no tools
  • Highest measuring accuracy by complying with the Abbe comparator principle
  • Test in accordance with international standard and guidelines, such as DIN, VDI, GOST, BS, NF, ASME and JIS
  • High-quality USB 3.0 industrial camera with high-quality images and large dynamic range
  • Sturdy, industry-compliant and daylight-insensitive LED lighting
  • Digital digits can be read off directly – no cable connection to measuring equipment required
  • Wide range of measuring equipment for testing, including dial indicators with a diameter up to 100 mm
  • Gages with pre-programmed nominal sizes and tolerances are directly available
  • Inductive probes from various manufacturers for testing (manual)
  • Calibration of dial indicators, dial test indicator measuring devices and dial comparators
  • The Precimar MSW 100 controls the dial indicator testing device, evaluates the camera image (scale or numerical display of testpiece) and the reference measuring values of the dial indicator testing device and also controls any subsequent processes as part of the testpiece management.
  • The testing routine can be completed based on DIN, VDI, DKD or DAkkS guidelines, various international standards, or according to internal specifications.
  • Any deviations of the testpieces are immediately recorded in a graph during testing.
Package contents:
  • Precimar ICM 100 basic unit
  • Precimar IP 100 upgrade set for processing images
  • Precimar MSW V12 software
  • Optional Precimar ICM IP image processing software
  • USB cable
  • Holder for dial indicators with shaft diameter 8 mm
  • Holder for dial test indicator measuring devices
  • Mahr factory calibration certificate
  • Operating instructions
Complete package or upgrade set! Mahr can supply Precimar ICM 100 IP as an upgrade solution or new purchase. Simply upgrade an existing manual Optimar 100 or ICM 100 test station or purchase the test device including image processing as a complete solution.
Precimar ICM 100 IP | № детали 5351010
Дискретность отсчета [мкм] 0,02
Погрешность измерений MPEE1 (L в мм) [мкм] ≤ (0,2 + L/250)
Вес [кг] 45

Variety of applications for our products

  • Калибровка индикаторов часового типа, рычажно-зубчатых индикаторов и измерительных головок
  • Программное обеспечение Precimar MSW 100 управляет работой универсальной установки для проверки индикаторов, а также выполняет обработку изображений с камеры (положения стрелки или значения на цифровом дисплее проверяемого прибора) и эталонных значений измерения установки для проверки индикаторов. Кроме того, данное ПО выполняет все остальные процедуры, связанные с управлением установкой.
  • Процедура тестирования может быть реализована на базе стандартов DIN, VDI, DKD или DAkkS, различных международных стандартов или исходя из технических условий компании.
  • Отклонения между тестируемыми объектами отображаются на графике во время испытания.
To top