MarForm | Универсальный прибор контроля погрешностей формы

MarForm MMQ 400

Art. no. 5440781

The MarForm MMQ400 range is the flexible, fully automated solution for form and position measurements and much more.
The use of extremely smooth axes and the MarWin platform software ensure that other applications, such as  roughness, waviness, and contour measurements can be completed.
The flexibility and versatility provide a highly cost-effective measuring system which pays for itself in the shortest amount of time.

MarForm MMQ 400
MarForm MMQ 400
MarForm MMQ 400 can be used universally for comprehensive workpiece assessment as per DIN ISO 1101.
High-precision measuring axes in Z and X make every form measuring task possible. There are MarForm MMQ 400 versions available for
  • High-precision workpieces
  • Unusually long workpieces
  • Large and heavy workpieces
  • Use in production or in inspection rooms
Choose from a range of modules available to optimally customize the MarForm MMQ 400 to your requirements:
  • Motorized or manual centering and tilting table
  • Vertical axis (Z) with a 900 mm, 500 mm or 350 mm measuring length
  • Horizontal axis (X) with a 180 mm or 280 mm measuring length and with digital linear scales in axes X and Z. For measurements where the exact, reproducible determination of the measuring location influences the result
  • optional motorized tailstock for shafts from 200 mm long
The T7W measuring probe has a motorized rotational axis which allows you to move the probe arm gradually into any desired contact position. It can be used for measurements on both cylindrical surfaces and end faces. In addition, as a zero position probe, the T7W can also switch between inner and outer measurements or between top and bottom end face measurements automatically, without operator intervention. Fully automatic measuring sequences on complex workpieces can be performed without operator intervention. The T7W probe arms are interchangeable. With its motorized rotational axis you can also create multi-point probe arms – i.e. probe arms with multiple contact elements – allowing you to switch between different stylus ball geometries within a measuring run.
Можно совмещать проверку погрешностей формы и расположения с контролем показателей шероховатости. Моторизированное переключение под управлением программного обеспечения между датчиком измерения формы с корундовым сферическим наконечником и датчиком измерения шероховатости позволяет измерять шероховатость и форму, не меняя положение зажимного устройства, что ведет к экономии времени и средств.
MarForm MMQ 400 | № детали 5440781
Отклонение от круглости (мкм + мкм/мм измер. высоты) * 0,01 + 0,00025
Диапазон измерения, с приводом по оси Z (мм) 500 
Отклонение от прямолинейности на 100 мм хода (мкм)**, ось Z 0.15 
Отклонение от прямолинейности на протяжении всего измерительного хода (мкм)**, ось Z 0.4 
Отклонение от параллельности осей Z-/C в направлении трассирования на протяжении измерительного хода (мкм) 0.8 
Скорость измерения (мм/с), ось Z 0,1-30
Скорость позиционирования (мм/с), ось Z 0,5 -100
Диапазон измерения, с приводом по оси X (мм) 280 
Отклонение от круглости (мкм + мкм/мм измер. высоты)** 0,02 + 0,0005
Отклонение от прямолинейности/средн. Измерительный ход 100 мм (мкм)**, ось X 0.5 
Отклонение от прямолинейности на протяжении всего измерительного хода (мкм)**, ось X 1.5 
Отклонение торцового биения (мкм + мкм/мм измер. радиуса) * 0,02 + 0,0001
Отклонение торцового биения (мкм + мкм/мм измер. радиуса) ** 0,04 + 0,0002
Стол с регулировкой центрирования и наклона вручную/автоматически
Диаметр стола (мм) 285 
Грузоподъемность стола, по центру (Н) 600 
Скорость (об./мин) 50 Гц/60 Гц 0,2–15
Текст нижнего колонтитула * Определяется как максимальное отклонение от окружности, полученной методом наименьших квадратов (LSC – least squares criterion), 15 волн/об.
** Все значения указаны в соответствии с DIN ISO 1101 при 20 °C ± 1 °C в среде без вибрации, фильтр 15 в/об LSC или 2,5 мм LSS при 5 об/мин или 5 мм/с и стандартным щупом с диаметром шарика 3 мм. Проконтролировано с помощью эталона с учетом алгоритмов компенсации. В связи с большим набором возможностей здесь представлено только незначительное число примеров систем. Технические характеристики «Вашей» установки MMQ могут быть получены от компании Mahr по Вашему запросу.

Variety of applications for our products

Specific measuring tasks
Form & position, roughness, contour, waviness, and line form in the following industries

Mechanical engineering

Bearings, ball screws, shafts, sockets, rotational bushings

Measurement close to production
PLC and end-of-line testing

Automotive industry
Steering, brake system, gearbox, motor

Medicine
Hip and knee endoprostheses,  medical screws,  teeth implants
Надежность процесса измерения
Highly accurate axes and scales ensure measurements are completed with the lowest measuring uncertainties.
Интуитивное управление
Simple switch between different measuring tasks and customizable software with feature-based creation of measuring programs and management of favorites.
Комбинированные методы измерения
The MarForm MMQ 400 is a universal measuring system for a broad range of applications. Combine form, roughness, contour, and a waviness analysis in one measuring procedure, for example.
To top