MarShaft | MarShaft SCOPE 350/750/1000 plus оптические системы измерения валов

MarShaft SCOPE plus

Art. no. 5361507

The MarShaft SCOPE plus can be used for optical and tactile measurements directly in the harsh manufacturing environment. In addition to the standard complete measurement of rotationally symmetrical workpieces, highly accurate form measurements can, for example, also be completed and features that were previously reserved for a standard form tester are now covered.

MarShaft <span>SCOPE </span><i>plus</i>
The MarShaft SCOPE plus is a universal, fully automatic optical shaft measuring system for testing rotationally symmetrical workpieces.

The MarShaft SCOPE plus has a highly accurate roundness measuring axis (C), a vertical measuring axis (Z) and a horizontal measuring axis (X).

A tactile measuring system with an inductive measuring probe is available as an option, for measuring radial and axial run-out, for example. The measuring device is calibrated to the optical measuring system, so it can perform tactile and optical measuring tasks in combination.

The new MarWin EasyShaft software provides a high level of flexibility and exceptionally user-friendly operation.

The measuring sequences are carried out fully automatically, free from operator influences.

The MarShaft SCOPE plus is suitable for use in both the harsh workshop environment and in the inspection room. Zoom functions allow the smallest details to be measured, which with conventional measuring tasks are difficult if not impossible to test.
MarShaft SCOPE plus | № детали 5361507
Диапазон измерений длины (Z) (мм) 350 / 750 / 1000
Диапазон измерения диаметров (X) (мм) 80 или 120
Разрешение, длина/диаметр (мм) От 0,01 до 0,0001
Угловое разрешение (°) От 0,01 до 0,0001
Предел допускаемой погрешности измерения длины (Z) (мкм) (2 + L/125) L в мм
(при 20 °C ± 1 °C на эталоне)
Предел допускаемой погрешности измерения диаметра (X) (мкм) (1,0 + L/125) L в мм
(при 20 °C ± 1 °C на эталоне)
Приводы Серводвигатели
Объектив Телецентрический прецизионный объектив
Матрица ПЗС высокого разрешения
Габариты

Variety of applications for our products

Типовые детали
  • Детали вращения
  • ШРУС
  • Трансмиссионный вал
  • Рейка
  • Шейка оси
  • Полый вал
  • Приводной вал
  • Распределительные валы
  • Валы турбонагнетателей
  • Костные винты
  • Червячные шестерни
  • Оси балансиров
  • Гидравлические детали
  • Клапаны (дизельных двигателей)
  • и многое другое
Datasheet
Download
Короткое время измерения
Short measuring times ensure that production errors are detected immediately and are ideally prevented
Комбинированные методы измерения
Complete measurement of shafts, highly accurate form and position measurement, contour measurement, thread measurement – all in one measuring system
Надежность процесса измерения
Reliable quality control guarantees reliable production
To top