MarShaft | Optyczny system pomiaru wałków MarShaft 600 plus 3D 

MarShaft SCOPE 600 plus 3D

Nr art. 5361522

The MarShaft SCOPE 600 plus 3D can be used for optical and tactile measurements directly in the harsh manufacturing environment. In addition to the standard measurement of rotationally symmetrical workpieces, the 100% 3D function can be used to also cover features that were previously reserved for a 3D coordinate or gear measuring machine. 

MarShaft SCOPE 600 <i>plus </i>3D
MarShaft SCOPE 600 <i>plus </i>3D
As a specialist in camshaft applications and more recently (optional) in straight and helical cylinder gears, Mahr now offers a completely new measuring technique with the new MarShaft SCOPE 600 plus 3D measuring station: The combination of optical and tactile sensors enables 3D functionality for the first time and thus a complete inspection of the workpiece in one setup. To this end, Mahr has enhanced its already very successful MarShaft SCOPE 750 plus measuring station. It now has a new 2D probe system, a motorized tailstock and calibration for the linear axes. The matrix camera optically measures features such as diameters, lengths, radii, form, position features, cam angles and the cam pitch in just a few seconds. The additional 2D probe records features that cannot be measured optically: concave cam profile, all standard gear parameters on cylindrical gears, axial runouts, reference elements in an axial direction, such as axial grooves. The tactile and optical system are calibrated in one coordinate system. The measuring station uses the MarWin software platform to deliver complete 3D functionality.
The user benefits from several advantages of the new measuring solution with
the MarShaft SCOPE 600 plus 3D:
The automated measuring task is much
faster and much more reliable: While conventional
coordinate measuring technology takes approximately 30 to 40 minutes
per workpiece, the Mahr measuring station can measure a
four-cylinder camshaft in just nine minutes.

Performance features at a glance: 

  • Complete measurement of camshafts, including the cam angle and all standard cam contours
  • Measurement of the gears on cylindrical gears
  • Measurement of contour elements
  • Highly accurate form and position measurements
  • Direct measurement of references (e.g. 2-flat or feather key groove)
  • Measurement of feather key grooves
  • Measurement of blind holes
  • 100% 3D function using new 2D probe
  • Additional Y measurement axis
  • Special calibration of linear axes (Z-X-Y)
  • MarShaft Professional software
  • Manual control panel and much more...
MarShaft SCOPE 600 plus 3D | Nr art. 5361522
Zakres pomiarowy – długość (Z) (mm) 600
Zakres pomiarowy – średnica (X) (mm) 120
Rozdzielczość – długość/średnica (mm) 0,01 do 0,0001
Rozdzielczość kąta (°) 0,01 do 0,0001
Błąd graniczny pomiaru długości (Z) (µm) (2 + L/125) L w mm (dla 20°C ± 1°C na wzorcu odniesienia)
Błąd graniczny średnicy (X) (µm) (1,0 + L/125) L w mm (dla 20°C ± 1°C na wzorcu odniesienia)
Napędy Serwomotory
Optyka Precyzyjny obiektyw telecentryczny, matryca CCD o dużej rozdzielczości
Wymiary

Różnorodne obszary wykorzystania naszego produktu

  • Kompletne pomiary wałków rozrządu
  • Kompletne pomiary wałów przekładniowych
Typowe mierzone elementy
  • Wałki rozrządu
  • Wały przekładniowe z uzębieniem
  • Wały mimośrodowe
  • Wały z wpustami pasowanymi lub otworami nieprzelotowymi
Krótkie czasy pomiarów

Short measuring times ensure that production errors are detected immediately and are ideally prevented

Połączone metody pomiaru
Complete measurement of shafts, highly accurate form and position measurement, 3D measurement, gear measurement – all in one measuring system
Pomiar wiarygodny dla procesu

Reliable quality control guarantees reliable production

Na górę