MarShaft | MarShaft SCOPE 350 / 750 / 1000 plus optical shaft measuring systems

MarShaft SCOPE plus

Art. no. 5361501

The MarShaft SCOPE plus can be used for optical and tactile measurements directly in the harsh manufacturing environment. In addition to the standard complete measurement of rotationally symmetrical workpieces, highly accurate form measurements can, for example, also be completed and features that were previously reserved for a standard form tester are now covered.

MarShaft <span>SCOPE </span><i>plus</i>
The MarShaft SCOPE plus is a universal, fully automatic optical shaft measuring system for testing rotationally symmetrical workpieces.

The MarShaft SCOPE plus has a highly accurate roundness measuring axis (C), a vertical measuring axis (Z) and a horizontal measuring axis (X).

A tactile measuring system with an inductive measuring probe is available as an option, for measuring radial and axial run-out, for example. The measuring device is calibrated to the optical measuring system, so it can perform tactile and optical measuring tasks in combination.

The new MarWin EasyShaft software provides a high level of flexibility and exceptionally user-friendly operation.

The measuring sequences are carried out fully automatically, free from operator influences.

The MarShaft SCOPE plus is suitable for use in both the harsh workshop environment and in the inspection room. Zoom functions allow the smallest details to be measured, which with conventional measuring tasks are difficult if not impossible to test.
MarShaft SCOPE plus | Art. no. 5361501
Measuring range length (Z) (mm) 350 / 750 / 1000
Measuring range diameter (X) (mm) 80 or 120
Length/diameter resolution (mm) 0.01 to 0.0001
Angle resolution (°) 0.01 to 0.0001
Length error limit (Z) (µm) (2 + L/125) L in mm
(at 20°C ± 1°C on reference standard)
Diameter error limit (X) (µm) (1.0 + L/125) L in mm
(at 20°C ± 1°C on reference standard)
Drives Servo motors
Lens Telecentric precision lens
High-resolution CCD array

Variety of applications for our products

Typical workpieces
  • Turned parts
  • Tripods
  • Transmission shaft
  • Rack
  • Axle journal
  • Hollow shaft
  • Drive shaft
  • Camshaft
  • Turbocharger shafts
  • Bone screws
  • Worm gears
  • Balance shafts
  • Hydraulic parts
  • Valves (diesel engine)
  • and much more
Short measuring times
Short measuring times ensure that production errors are detected immediately and are ideally prevented
Combined measurement methods
Complete measurement of shafts, highly accurate form and position measurement, contour measurement, thread measurement – all in one measuring system
Process-reliable measurement
Reliable quality control guarantees reliable production
To top